Universal Launch Monitor Enclosure Flush Mount

A Flush Mount for Overhead Launch Monitors on the SIGPRO Commercial Enclosure

The Universal Launch Monitor Enclosure Flush Mount attaches a ceiling-mounted (overhead) launch monitor directly to the frame of a SIGPRO Commercial Enclosure. Instead of building a separate bracket or drilling into the ceiling of the bay, you clamp the mounting plate to the enclosure's overhead pipe and bolt the launch monitor to the plate. The launch monitor then sits tight to the frame, above the hitting area, in a fixed position relative to the screen and the mat.

What is in the kit

• Black steel mounting plate with a pattern of slots and holes, printed with The Indoor Golf Shop logo
• Two U-bolts with nuts
• Two black split pipe clamps
• Machine screws, nuts and washers

How it works

The two split pipe clamps close around the enclosure's overhead frame pipe, and the U-bolts pass around the pipe and through the plate to pull it up tight against the clamps. The plate's slotted pattern gives you room to line up the launch monitor's own mounting holes and to slide the monitor forward or back along the plate before you tighten it down. Because the plate is clamped rather than welded or drilled, it can be repositioned along the pipe when you set up the monitor's distance from the ball.

Where an overhead launch monitor sits relative to the ball matters for accurate readings, and each maker publishes its own placement guidance. Follow your launch monitor's manual for the distance from the hitting position, and see our launch monitor placement guide.

Why mount to the enclosure

In a commercial bay or a finished room, the ceiling is often the wrong height, has a drop-ceiling grid, or is simply off-limits. The SIGPRO Commercial Enclosure frame is already rigid steel in the right place over the hitting area. Mounting the launch monitor to it keeps the monitor, the screen and the mat in the same fixed relationship, which makes setup repeatable from one bay to the next. It also keeps the launch monitor out of reach of club swings and stray balls.

Before you order

• It is made for the SIGPRO Commercial Enclosure frame.
• Check your launch monitor's mounting holes against the plate; most overhead monitors bolt to a flat plate.
• Browse our commercial launch monitors and all launch monitors.

Pair it with the projector enclosure frame mount to hang the projector from the same enclosure frame. Questions about fit? Send us your launch monitor model and our team will confirm it before you order.